Collection: Ford 3.0L Powerstroke(2018-2020)

14 Products

Filter products

The highest price is $3,199.00
$
$

What Is the 3.0L Powerstroke Engine?

The 3.0L Powerstroke diesel engine was offered in select 2018–2020 Ford F-150 models.
Known for its quiet operation and solid fuel economy, it’s a strong platform with serious tuning potential.

It’s a 6-cylinder turbo diesel that shares DNA with the Land Rover Lion engine, delivering around 250 hp and 440 lb-ft of torque stock. But with the right delete kit and tuning, you can take it to the next level.

Why Consider a Delete Kit for Your F-150 3.0L Diesel?

If you're running your truck off-road or in competition, emissions systems like the DPF, EGR, and DEF can restrict performance.

A proper delete kit removes these systems for off-road use, allowing the engine to breathe easier and run cooler — especially under load or long hauls.

You’ll notice quicker throttle response, reduced regen cycles, lower EGTs, and a smoother overall powerband.
Paired with a tuner, it completely changes how the truck drives.

Note: All delete kits sold on this page are intended for off-road use only and may not be legal for street use in your area. Always check your local laws.

Recommended Kits Based on How You Use Your Truck

No two builds are the same. That’s why we’ve broken down our top recommendations based on how you use your F-150.

Daily Driving – Reliable, Clean, and Consistent

If you’re using your 3.0L Powerstroke for daily commuting or light duty driving, you want something clean, smooth, and reliable.

Look for partial delete kits or setups that minimize soot output and keep EGTs stable. Tuners with mild-to-moderate tunes help keep the truck streetable while unlocking a noticeable bump in power.

Recommended:
EGR delete + daily-safe tune + 4” exhaust
Minimal smoke. No limp mode. Reliable startup every time.

Towing & Heavy Load – Power + EGT Management

Towing puts your engine under constant stress. You need torque early in the rev range and the ability to keep temps down on long grades.

A full delete kit paired with a tow-specific tune will help the 3.0L breathe better, reduce turbo lag, and cut down on regen cycles during heavy hauling.

Recommended:
Full delete + tow-tune + upgraded exhaust clamps
More low-end grunt. Safer temps. Fewer interruptions.

Off-Road / Race Use – All-Out Performance

For off-road rigs or weekend builds, go all in.

With emissions components out of the way and a performance-focused tune, the 3.0L Powerstroke becomes way more responsive — and a lot more fun to drive.

Recommended:
Full DPF/DEF/EGR delete + Race-only Tuner
Max flow. No regen. All go.

Which Years & Models Are Compatible?

All kits listed on this page are engineered for:

✅ 2018 Ford F-150 3.0L Powerstroke

✅ 2019 Ford F-150 3.0L Powerstroke

✅ 2020 Ford F-150 3.0L Powerstroke

Not sure if your trim or engine is supported? Reach out — our team is happy to verify fitment before you order.

Tuner Required? Legal? Install Tips?

Do I Need a Tuner for My 3.0 Powerstroke Delete Kit?

Yes — absolutely. A tuner is required to reprogram your ECU after emissions components are removed.

Without a tune, your truck will throw codes, run poorly, or go into limp mode. Some kits come pre-bundled with compatible tuners for convenience.

Is It Legal to Run a Deleted Truck?

Deleting emissions systems is not legal for on-road use in most U.S. states. These kits are for off-road and race use only.

We always recommend checking local and federal emissions regulations before modifying your vehicle.

Can I Install This Myself?

If you’re comfortable turning wrenches and have basic tools, you can probably handle it.

Most 3.0L Powerstroke delete kits install in 2–4 hours. That said, a professional install ensures everything’s sealed, torqued, and tuned correctly.

FAQs – 3.0L Ford Powerstroke Questions Answered

Q1: Why did Ford discontinue the 3.0 Powerstroke?
A: Ford dropped the 3.0L Powerstroke after 2021 due to low demand and tightening emissions regulations. Many buyers opted for the EcoBoost or 5.0L gas engines, which offered similar performance with less cost and complexity.

Q2: What years was the 3.0 Powerstroke available?
A: The 3.0L Powerstroke diesel was available in the Ford F-150 from 2018 to 2020 in the U.S. market. It was offered mainly in higher trim levels like Lariat, King Ranch, and Platinum.

Q3: How much can a 3.0 Powerstroke tow?
A: Properly equipped, a 3.0L F-150 Powerstroke can tow up to 11,400 lbs. Towing capacity depends on axle ratio, bed length, and tow package configuration.

Q4: How many MPG does the 3.0 Powerstroke get?
A: The 3.0 Powerstroke averages 25–30 MPG highway, making it one of the most fuel-efficient diesel trucks in its class — especially in 2WD configurations.

Q5: Is the 3.0 Powerstroke reliable long-term?
A: Yes, when properly maintained, the 3.0L Powerstroke is known for solid reliability. It's based on a proven diesel platform used in Land Rover models, though some emissions-related components (like the EGR/DPF) can cause issues over time.

Q6: Can you delete the emissions systems on a 3.0 Powerstroke?
A: Yes — delete kits are available for off-road use only. Removing DPF, DEF, and EGR components improves airflow and reduces regen cycles, but it's not legal for street use in most areas.

Q7: Do I need a tuner if I delete my 3.0 Powerstroke?
A: Absolutely. A tuner is required to recalibrate your truck’s ECU after removing emissions components. Without tuning, the truck may go into limp mode or throw error codes.

Q8: Can I daily drive a deleted 3.0 Powerstroke?
A: Technically yes — many owners do. But keep in mind, deleted trucks are for off-road use only. Daily driving a deleted truck on public roads may violate emissions laws and impact resale or warranty.

Q9: What’s included in a typical 3.0 Powerstroke delete kit?
A: Most kits include:

DPF delete pipe

EGR block-off plates

DEF tank bypass

Necessary clamps and hardware
Some premium kits also bundle in a compatible tuner.

Q10: Is it hard to install a 3.0 Powerstroke delete kit?
A: It depends on your tools and experience. With basic mechanical knowledge, most users can complete the install in 2–4 hours. That said, a professional install ensures everything is sealed, tuned, and safe.

Still Have Questions? Let’s Talk.

We get it — diesel deletes aren’t one-size-fits-all.

If you need help selecting the right setup for your F-150 3.0 Powerstroke, please don't hesitate to contact us.
We’re diesel guys too — and we’re here to help.

Disclaimer SPETUNER’s delete kits are intended for off-road or racing use only. They may not be street-legal in all areas, so please verify local laws before installation. Professional installation is strongly recommended to ensure the best results.