SPETUNER
GM 2017-2023 6.6L Duramax L5P – OBDii Flash Delete Tuning Interface
---tab Description---
L5P Delete Tuning for 2017-2023 6.6L Duramax
This L5P delete tuning solution is designed for 2017-2023 Chevrolet Silverado and GMC Sierra 2500HD/3500HD trucks equipped with the 6.6L Duramax L5P. It combines an OBDII tuning interface with the tools needed to prepare the factory E41 ECM for tuning, read and write calibration files, scan diagnostic trouble codes, and data-log the truck.
Before you buy Duramax L5P tuning, verify the model year, truck configuration, and selected package before ordering. Current orders placed on or after March 27, 2025 include credits and tunes. Tunes are non-refundable once purchased.
- 2017-2023 L5P GM Duramax
- Chevrolet Silverado / GMC Sierra 2500/3500 6.6L
Choose the Correct Package
- Delete Tuner with Unlock Tool & Tune: select this option when you need the tuning interface, ECM unlock hardware, and tune package shown on this page.
- L5P E41 ECU Unlock Kit: select this option only when you need the E41 unlock kit rather than the complete tuner package.
The two variants are not interchangeable. Confirm the exact contents of your selected option before checkout, especially if you already own tuning hardware or your ECM has previously been unlocked.
What Is Included with Current Tuner Orders?
- OBDII flash tuning interface
- E41 ECM unlock tool with the complete-package option
- Programming and USB cables
- Editor and scanner software features
- Credits and tunes for orders placed on or after March 27, 2025
Reading a vehicle and data logging with HP Tuners do not consume credits. Credits are used when a vehicle or supported control module is licensed for flashing. Contact us before purchase if you need to confirm the credits, module licensing or tune files included with your selected package.
Selectable Power Levels
For supported 2017-2023 SOTF applications, the supplied calibration offers five selectable levels:
| Level | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Advertised increase | 0 HP | 50 HP | 75 HP | 100 HP | 150 HP |
Actual results depend on the truck, calibration and supporting hardware. We strongly recommend monitoring exhaust gas temperature (EGT) when using Levels 4 and 5. The 4500/5500 Cab & Chassis calibration is limited to 60 HP.
OBDII Scanning, Data Logging and Calibration Tools
The interface can read supported control-module data, save calibration files and write compatible tune files through the vehicle's OBDII port. Its scanner tools can chart and log live diagnostic data, view and clear diagnostic trouble codes and access supported module information. Editor functions include access to supported parameters such as torque strategies, RPM limits, transmission shift points and speedometer settings.
Changing calibration parameters requires appropriate tuning knowledge. Use a verified tune for the exact truck and keep a copy of the original read before flashing.
Installation Overview
- Confirm vehicle, ECM and package compatibility before purchase.
- Install the software and connect the supplied interface and cables.
- Read and save the original vehicle file before making changes.
- Complete the required E41 ECM unlock procedure.
- License the vehicle/module with the required credits and flash the correct tune.
- Check for diagnostic trouble codes and data-log the truck after installation.
READ EVERY STEP BEFORE YOU MAKE ANY MODIFICATIONS TO YOUR TRUCK.
Important Purchase and Use Information
- All tune sales are final and non-refundable.
- Orders placed before March 27, 2025 did not include the current credits-and-tunes benefit.
- Do not interrupt power or disconnect the interface while writing a calibration.
- Keep the truck connected to a suitable battery charger during reading/unlocking/flashing when required by the instructions.
- Contact support before ordering if the truck has a replaced ECM, an existing tune or an unusual vehicle configuration.
Compliance notice: Products or calibrations that alter, bypass or disable emissions controls are intended only for lawful competition or closed-course applications where permitted. They are not legal for use on emissions-controlled vehicles operated on public roads. The purchaser is responsible for understanding and following all federal, state and local requirements.
---tab Fitment---
Vehicle Fitment:
| Vehicle | Chevrolet Silverado / GMC Sierra |
|---|---|
| Model year | 2017-2023 |
| Engine | 6.6L Duramax L5P |
| Standard applications | 2500HD / 3500HD |
| 4500/5500 Cab & Chassis | Limited to a 60 HP tune. Contact us before ordering. |
Before ordering: confirm that the truck still has its factory-compatible E41 ECM, choose the correct product variant, and tell our support team about any ECM swap, previous tune, or non-standard Cab & Chassis configuration.
---tab FAQ---
Frequently Asked Questions
Q: Does this L5P delete tuner work on a 2019 6.6 Duramax?
A: Yes. A 2019 Chevrolet Silverado or GMC Sierra 2500HD/3500HD with the 6.6L Duramax L5P is within the listed 2017-2023 fitment range. Confirm that the truck uses a compatible E41 ECM and disclose any previous ECM replacement or tuning before ordering.
Q: Does the factory L5P ECM have to be unlocked before tuning?
A: Yes. The E41 ECM must be prepared for tuning before a calibration can be written. Select the complete package if you need both the tuner and unlock tool, then follow the linked factory-ECM instructions in full.
Q: Are credits and tunes included?
A: Current orders placed on or after March 27, 2025 include credits and tunes. Orders placed before that date did not. Because licensing needs can vary by module and package, confirm the exact included allocation before ordering if you plan to tune more than the ECM.
Q: Do reading and data logging use credits?
A: No. Reading and data logging with HP Tuners are free and do not require credits. Credits are required when licensing a supported vehicle or module so a tune can be flashed.
Q: What is the difference between the two product options?
A: The “Delete Tuner with Unlock Tool & Tune” option is the complete-package choice described on this page. The “L5P E41 ECU Unlock Kit” option is for buyers who need the unlock kit only. Verify the selected option in the cart before checkout.
Q: Does SOTF work on every 2017-2023 L5P?
A: The five listed power levels apply to supported 2017-2023 SOTF calibrations. Vehicle configuration and tune support must be confirmed before purchase. The 4500/5500 Cab & Chassis application is limited to a 60 HP tune.
Q: Can I return the tune if it does not match my truck?
A: No. Tune purchases are non-refundable. Confirm the VIN/model year, engine, ECM status, truck model, and selected package before the tune is prepared or delivered.
Q: Should I monitor EGT after L5P tuning?
A: Yes, especially when using Levels 4 and 5. Load, towing, ambient conditions and the truck's hardware can all affect exhaust gas temperature.
Q: Can this be used on a street-driven truck?
A: Not where the calibration alters or disables required emissions controls. Such products and calibrations are limited to lawful competition or closed-course use where permitted and are not legal for emissions-controlled vehicles driven on public roads. Check all applicable laws before purchase or installation.