---tab Description---

SPEtuner EGR/DPF Delete Kit | 2010-2012 Dodge Ram 2500/3500 6.7L Cummins

Take absolute control of your heavy-duty truck. The SPEtuner EGR & DPF Delete Kit is the ultimate performance overhaul, specifically engineered to eliminate the most restrictive factory emissions bottlenecks—DPF, DOC, and EGR—from your 2010–2012 Dodge Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine.

Key Features

• Massive High-Flow Exhaust Velocity: Replaces restrictive downstream emissions equipment with a smooth, continuous high-flow path, dropping exhaust backpressure to near-zero and protecting your VGT turbocharger.
• Drastically Drops EGTs (Exhaust Gas Temps): Eliminating the thermal cork of the DPF and catalytic components allows hot exhaust to evacuate instantly, preventing heat soak and safeguarding your pistons, head gaskets, and engine oil during heavy towing.
• Instantaneous Turbo Spool-Up: Removing the EGR and exhaust bottlenecks lets your turbocharger spin up effortlessly, completely curing low-end lag and providing immediate, razor-sharp throttle response.
• Maximized Fuel Economy (MPG): End the fuel-thirsty, active DPF regeneration cycles that waste raw diesel to "burn off" soot, yielding a dramatic, real-world improvement in your overall fuel mileage.
• Pure Engine Longevity: Keeping abrasive soot and hot exhaust gases out of your intake manifold via the EGR delete ensures your intake valves, pistons, and fuel injectors stay surgically clean for hundreds of thousands of miles.

Specification

• Material: T-409 Stainless Steel, it is magnetic.
• Thickness: 2mm thick for long-lasting durability and heat resistance.
  
• Inlet Diameter: 4"
• Mandrel-Bent Construction: Maximum flow efficiency, helping your diesel breathe easier

Installation

2010-2012 Ram 6.7L Cummins EGR Delete Kit Instruction

2010-2012 Ram 6.7L Cummins DPF Delete Pipe Instruction

How to Choose Your DPF Delete Kit?

Different Types of DPF Delete

DPF Race Delete

• DPF-only removal for minimal system alteration
• Most economical delete solution available
• Designed for tight budgets or emissions-testing avoidance, not maximum performance gains

Downpipe-Back Delete

• Full replacement from downpipe to tailpipe for unrestricted flow
• Increases torque and throttle response where it matters most on the street
• Perfect for mild street builds that keep the original turbo in place

Turbo Back Delete

• Complete exhaust overhaul from the source
• Maximizes flow efficiency and minimizes backpressure
• Quicker spool and increased peak horsepower
• Ideal for high-performance and heavily modified setups

---tab Fitment---

Fitment

• 2010–2012 Dodge Ram 2500 (6.7L Cummins Turbo Diesel)
• 2010–2012 Dodge Ram 3500 (6.7L Cummins Turbo Diesel)

---tab FAQ---

FAQ

Q1: Do I need a custom tuner/tuner file to run this kit?
A1: Yes. Installing an EGR/DPF delete kit without custom tuning (such as EZ LYNK, EFI Live, or MM3) will cause the vehicle to throw Check Engine Lights (CEL) and enter "limp mode." A delete-capable tuner is required to disable the EGR and DPF diagnostic trouble codes (DTCs) and software routines in the ECM.

Q2: Does this kit fit Cab & Chassis models, or only standard Pickup models?
A2: This kit is engineered specifically for standard Pickup truck bed models (2500/3500). Cab & Chassis models utilize a different frame profile and exhaust routing, so custom fabrication or specific Cab & Chassis adapters may be required for proper fitment.

Q3: What happens to the DEF (Diesel Exhaust Fluid) system after installation?
A3: Most 2010–2012 Ram 2500/3500 pickup trucks did not use DEF from the factory (DEF was introduced on 3500 Cab & Chassis during these years and pickups in 2013). However, if your specific setup has DEF/SCR components, installing this kit and flash-tuning the ECM allows you to completely turn off and drain/remove the DEF fluid system.

Q4: Does this kit require any cutting, welding, or permanent modification?
A4: No welding is required. The kit features precision bolt-on flanges and mandrel-bent slip joints designed to align with existing factory mounting locations and rubber exhaust hangers. Basic hand tools and standard garage equipment are sufficient for installation.

Q5: Will installing this delete kit pass state emissions inspections?
A5: No. This product is strictly designed and sold for off-road, competition, or track use only. Removing factory emissions control equipment violates the Clean Air Act in the United States and similar environmental regulations worldwide, making it illegal for use on public highways or roads subject to emissions testing.

Q6: Will my truck produce visible black smoke after installing this kit?
A6: Smoke output depends entirely on the tune file loaded into your ECM. On a standard "tow" or "street" clean-tune file, visible smoke will be minimal to non-existent under normal driving. Higher-horsepower "race" tunes may produce visible soot under heavy acceleration.