Coolant temperatures run cooler because they are not running thru EGR Cooler
Hot exhaust gasses are not being re-routed back into the motor
Coolant re-route hose included (no blocked off coolant hoses)
Completely replaces EGR Valve & EGR Cooler, No other parts required for installation
Includes transmission dipstick and coolant hose bracket
Includes detailed installation instructions
Exhaust manifold plates are tapped for EGT probe
Package Including:
1X Support Bracket
1X Coolant Hose
2X Hose Clamps
4X Bolts
2X Bolts
2X Lock Washers
2X Flat Washers
2X Nuts
3X Block-off Plates
What Are The Benefits of EGR Delete? An EGR delete can bring about several benefits. These include:
Improved Fuel Economy and Engine Longevity An EGR delete helps you restore your diesel engine’s power levels which, in turn, also restores your overall fuel efficiency. Since an EGR delete kit sends the exhaust gas away from your car’s engine, it starts to run cleaner, too. Not only does it make the process increasingly efficient, but it also reduces the chances of DPF (diesel particulate filter) failure. So, overall, with this aftermarket kit, you can see an increase of up to 20% in your fuel economy. Along with that, the EGR delete kit can also improve your engine’s longevity.
Reduced Engine Temperature EGR valves naturally contain a high content of soot. When the EGR system’s valve or coolers get clogged with soot, the exhaust gases start to circulate more around the system, resulting in a blockage. As a result, the temperatures around the engine rise and you experience a reduction in the engine’s power. However, when you bypass this, lower exhaust gas is produced. In turn, during operation, your vehicle experiences a reduced engine coolant temperature.
Helps Save Money In addition, an EGR delete can also help you save money on some costly repairs. The EGR, if damaged, can be quite costly to repair and replace. An EGR delete removes the possibility of such damage, thereby saving your money.
FUNCTION: Coolant temperature run cooler because they are not running through EGR Cooler. Eliminates soot build-up and clogged EGR Valves. Hot exhaust gasses are not being re-routed back into the motor.
What are the differences between the upgraded version and the basic version?
Upgrade Version
Intake Duct Physical Structure: In addition, an EGR delete can also help you save money on some costly repairs. The EGR, if damaged, can be quite costly to repair and replace. An EGR delete removes the possibility of such damage, thereby saving your money.
Intake Efficiency and Drag: Maximizes airflow, achieves the highest inflation efficiency, and ensures unobstructed air intake.
Throttle Response and Performance: More responsive throttle, faster turbo spooling, and higher performance ceiling at high RPMs and under heavy loads.
Tuning Calibration Requirements: Throttle logic and related fault codes must be completely disabled in ECU tuning. Otherwise, codes will be reported or Limp Mode will be entered.
Ordinary Version
Intake Duct Physical Structure: The original throttle body is retained in the intake manifold.
Intake Efficiency and Drag: Even when the throttle is fully open, the valve shaft and butterfly valve plate remain in the intake manifold, generating turbulence and physical wind resistance.
Throttle Response and Performance: Performance has been improved, but it is limited by the internal constraints of the original intake bend and throttle body.
Tuning Calibration Requirements: The EGR logic needs to be disabled and the throttle body can remain in the unplugged or fully open state.
Your order will be dispatched within 1-2 business days, and the package is expected to arrive by the estimated delivery date. Click to View Shipping Policy.
Easy Return Policy
Every order comes with a 30-day free return, which means you don't have to pay for a return slip. Click to View Return Policy.
Choosing a selection results in a full page refresh.